TE_iD in a nutshell
- TE_iD is a connector to our manufacturing database WaWiReg.
- Through this database connector the application recieves the manufacturing and calibrational data of thermo-control thermocouples.
- The serial number of the thermocouple is printed with a link on a label as a QR-Code.
- In order for TE_iD to work the QR-Code needs to be scanned using a native scanner on a mobile device or a laptop with a 2D barcode scanner
- You will find more information in the documentation.
Your advantages
- All important data of the thermocouple to be tested are available at any time.
- Your data cannot get lost and can not be manipulated by third parties.
- Already delivered thermocouples can be retrofitted with TE_iD labels.
- After purchasing the label, no credentials or ongoing licenses are required for its use.
Just 3 steps to the data
1: Find the QR-Code
2: Scan the QR-Code
3: Get the data
More details on TE_iD
Since December 2016, all thermo-control Körtvélyessy GmbH thermocouples and oxygen sensors with calibration certificate have been provided with corresponding QR codes. To protect the label they are mounted inside the connection head. With this code you can view the product data directly from the production database free of charge.
In addition, for a one-off fee, the corresponding calibration data and certificates can be unlocked.
These can then be used at any time and without limitation, e.g. have the data of the thermocouple in the regular test measurements or audits.
Try it now
In the form on the right, enter a serial number of a thermo-control product. After clicking on the button, a new window opens in which TE_iD searches and displays the data for the entered serial number.
Free
avaliable for all thermo-control products with a serial number- Product type
- Specification
- Material Number
- Number and type of built-in thermocouples
- Serial number
- Date of delivery
TE_iD Label
in combination with a new part- including production data
- Type of calibration (coil or single)
- Date of initial calibration
- Application or highest achieved hierarchical
- Date of re-calibration
- Table with measured readings and deviations
- Certificate of calibration
- Certificate of conformance (if applicable)
TE_iD Label
for subsequent registration- including production data
- Type of calibration (coil or single)
- Date of initial calibration
- Application or highest achieved hierarchical
- Date of re-calibration
- Table with measured readings and deviations
- Certificate of calibration
- Certificate of conformance (if applicable)
General data (free of charge)
This includes:
- product group
- specification
- Material number
- Built-in thermocouples (number and alloy)
- serial number
- date of delivery
Calibration data (*)
All calibration data is listed here:
- Type of calibration (roll or single)
- Date of initial calibration
- Use or highest hierarchical application level
- Date of re-calibration
Measurement data (*)
In this part, the actual measured values of the calibration are listed in tabular form.
- MP – measuring point
- Ref – value of the reference thermocouple
- dT 1 – deviation beginning coil or thermocouple 1
- dT 2 – deviation end coil or thermocouple 2
- dT n – deviation n-th thermocouple
- Ø Err – Average deviation
Certificates (*)
The certificates stored in the system can be downloaded as a PDF.
